sherik.net

  • RSS
  • Facebook
  • Twitter
  • Linkedin
Home > Dvd Drive > DVD ROM Not Reading Any Disc

DVD ROM Not Reading Any Disc

Contents

Even though you may want to open discs through Windows Explorer or other software means, use the following steps to make sure AutoPlay is enabled so that discs can be more If AutoPlay is disabled, nothing may happen when a disc is inserted. Just last night I tried wiping the lens with a cotton swab/Q-tip with a little bit of rubbing alcohol on it to see if that would help but I am still Click on the troubleshooting steps below for more instructions. Source

Windows checks for problems. Click Change AutoPlay settings. Loading... Click Device Manager. learn this here now

Dvd Drive Not Reading Discs Windows 10

Use the following steps to help determine if discs or the drive need further attention: Insert a software CD (like a game or business software) into the CD or DVD drive Use the following steps to test the discs and the drive from a command prompt: Click Start , and enter CMD into the Search field. I also have the Sony DVD DW-56A in a Sony VGN A297XP laptop. Adnan Megahed 104,865 views 3:16 CD/DVD can't read - Duration: 1:16.

Privacy Policy © Copyright 2016 HP Development Company, L.P. Aug 22, 2005 #6 urbandragon TS Rookie Posts: 231 you just mentioned loud sounds from your dvd-rw drive...... Helpful +31 Report GiantLeap 94Posts Saturday November 29, 2008Registration date December 8, 2008 Last seen Dec 3, 2008 at 03:31 PM lens cleaning Helpful +15 Report maroo Feb 2, 2009 at Dvd Drive Not Reading Windows 8 Click Save when done.

Advertisement Autoplay When autoplay is enabled, a suggested video will automatically play next. It's now out of warranty so I would have to pay Sony 12.50 Sterling to get an answer. I would say like AARRGGHHH: It looks like an IDE-0 Master to IDE-1 Slave problem, since there is nothing wrong with the lens' themselves. http://ccm.net/forum/affich-17795-dvd-rom-not-reading-cds Step 2: Making sure AutoPlay is set on computers running Windows 7 One possible reason for a non-responsive CD/DVD drive is AutoPlay being turned disabled.

The instructions below will help you diagnose and resolve issues if your CD, DVD or Blu-ray drive is unable to read or recognize any discs that you insert into the drive. Dvd Drive Wont Read Discs Windows 7 Join the community here, it only takes a minute. Wait about 20 seconds for the disc to achieve full spin velocity. Report Someguy- Feb 1, 2009 at 11:09 PM Try updating your Drivers If that doesn't work you need a new rom Report Guru- Mar 31, 2010 at 10:21 AM HI everyone

Dvd Drive Not Reading Discs Windows 7

If you get any prompts from User Account Control while accessing Device Manager, click Yes to continue. http://support.hp.com/us-en/document/c01897812 The issue is not likely related to the drive or the disc. Dvd Drive Not Reading Discs Windows 10 Confirm that the drive can read discs from a command prompt. Dvd Drive Not Working Windows 7 esesolox3 153,582 views 5:52 How to Fix your Undetected CD/DVD Drive - Duration: 3:10.

If the drive fails, replace the drive. http://sherik.net/dvd-drive/dvd-cd-sata-drive-not-reading-disks.php For more information about using System Restore, use the HP support document Using Microsoft System Restore in Windows7. Any suggestions?? Transcript The interactive transcript could not be loaded. Dvd Drive Fixer

HP Customer Support Z7_3054ICK0KGTE30AQO5O3KA30U7 hp-contact-secondary-navigation-portlet Actions ${title} Loading... Helpful +0 Report sarbel.vilo 234Posts Tuesday November 18, 2008Registration date August 1, 2010 Last seen Dec 2, 2008 at 05:15 AM The only solution I can tell you is to buy Sen. have a peek here Z7_3054ICK0KGTE30AQO5O3KA3015 hp-online-communities-portlet Actions ${title} Loading...

How could this be possible Pls help me out . Cd Drive Not Working Windows 8 Fix It Now Fast - Duration: 4:56. Follow these steps to use the Hardware and Devices troubleshooter to check for problems with your CD/DVD drive: Click Start , and then click Control Panel.

Click OK to confirm that you want to remove the device.

Use discs that are in good condition and are known to work in other drives. Can anyone help please? If your drive is unable to read discs that were purchased from a store, those from a music or software company, skip this section and start troubleshooting at Step 1. Media In Cd/dvd Drive Is Not Readable Step 3: Checking discs computers running Windows 7 Common causes for CD/DVD failures are damaged or poorly manufactured discs.

Use a pre-recorded CD, DVD or Blu-ray disc depending on the type of drive that is installed on your computer. your dvd read head may have read its last disk. Shailesh Sharma 491,227 views 7:52 How to fix your CD/DVD drive (if your computer doesn't detect it) - Duration: 2:40. Check This Out Continue troubleshooting.

The issue is not likely related to the drive or the disc. If the discs fail in another drive on another computer, the discs are probably bad. It's a LG. Verify that the type of disc you are using is compatible with the drive that is installed on your computer.

View article Z7_3054ICK0KGTE30AQO5O3KA30N0 hp-concentra-wrapper-portlet Actions ${title} Loading... When Windows opens, wait until the Found new hardware wizard fully configures the drive. Apr 21, 2006 #20 DarkKnyte TS Rookie something similar I have a similar problem. Those two are both cd roms but they wont read.

my burner reads and burns cd's without a hitch it reads dvd's just fine but when i put a blank dvd in it tells me that it is full and i Back to Top

Article ID: SLN129293 Last Date Modified: 07/13/2016 04:41 AM Rate this article Accurate Useful Easy to understand Was this article helpful? Advertisement Autoplay When autoplay is enabled, a suggested video will automatically play next. In the Device Manager window, expand DVD/CD-ROM drives.